10TPD plastic to fuel oil machine project in Columbia

In December 2019, the installation of the plastic to fuel oil machine in Columbia has completed under the guidance of our engineer. Next our engineer would help customer debug the machine and train the workers until they could run the machine by themselves.

plastic to fuel oil machineThe engineer is debugging the plastic to fuel oil machine

After debugging and training in nearly five days, the plastic to fuel oil machine has produced pyrolysis oil successfully. Now accoding to the feedback by our engineer, the oil yield of his plastic to fuel oil machine can reach 60%. Our customer are so satisfied to the results that he promised he would order machine from Doing Group again if he expands his production line.

plastic to fuel oil machineThe pyrolysis oil made by plastic to fuel oil machine

You may want to know why so many people choose to do this project. Here I prepare an approximate profits analysis for the plastic to fuel oil machine project for you (different types of plastic have different oil yield, here we use the white plastic sheets as reference):

Profit analysis (Reference to 10TPD plastic to fuel oil machine)
Running cost/day
Waste white plastic Nearly free
Heating fuel(Coal) 0.4T*USD70/T=USD28
Power consumption 244kwh*USD0.26=USD63.44
Water consumption Water is for circulating use, no consumption
Required workers 4*USD15=USD60
Total cost USD151.44
Income/day
Fuel oil 7T*USD960=USD6,720
Carbon black 3T*USD20/T=USD60
Daily profits USD6,780 - USD151.44=USD6628.56

From this form, you can see that only one day you can get profits nearly USD6628.56. Don’t you want to set up such a profitable project? Contact us to know more information now!

--------------

Leave A Message About 10TPD plastic to fuel oil machine project in Columbia

Send Message