Are there any requirements about the size of the raw materials for pyrolysis plant?

Pyrolysis plant can dispose of many kinds of waste like tire plastic and recycle them into new energy fuel oil, carbon black, etc. For the batch pyrolysis plant, normally you can directly feed the waste raw materials without pretreatment. But the fully continuous pyrolysis plant has some requirements about the size of raw materials.

DOING factory waste tyre pyrolysis plant

Here I will explain the requirements about the size of the raw materials for pyrolysis plant in detail.

For batch pyrolysis plant, we don’t need to consider too much on the requirements about the size of the raw materials. Because the batch pyrolysis plant works in a manner of batch by batch, which doesn't need the pretreatment of waste tire plastic raw materials. It only needs to meet the requirement that the raw materials size is smaller than the diameter of pyrolysis plant reactor(about 1.5m, may vary from the machine scales). Therefore, conventional batch pyrolysis plant can meet the feed size requirements of most raw materials.

While fully continuous pyrolysis plant requires tires to be in the form of about 5mm rubber powder, and plastics need to be crushed to a certain extent. Then processed waste tires, waste plastics and other raw materials can enter the refining furnace through a fully enclosed feeding system for high-temperature pyrolysis. It operates 24 hours a day, with high pyrolysis efficiency and high safety and environmental protection factors.

Rubber powder machine

After more than 11 years of exploration and technology update, the pyrolysis efficiency of DOING pyrolysis plant has further improved. And through the unique four-stage cooling system to get the oil with high oil yield. There is no doubt it can create great profits for you.

If you want to know more details about our batch pyrolysis plant or fully continuous pyrolysis plant, please consult us for free! We will customize the best pyrolysis plant solutions for you in combination with your raw material characteristics.