Which type of pyrolysis reactor is suitable for pyrolysis tires and plastics? Horizontal or Vertical?

Horizontal type pyrolysis reactor is more suitable for pyrolysis tires and plastics. And with the development of waste tire and plastic pyrolysis industry, the vertical type pyrolysis reactor is gradually knocked out from the market mainly due to its poor working efficiency and terrible performance in the aspect of environmental protection.

Two types pyrolysis reactor

The following are the comparisons of horizontal type pyrolysis reactor and the vertical type pyrolysis reactor on their working efficiency and environmental protection.

The horizontal type pyrolysis reactor is designed to rotate during the heating process, then waste tires and plastics inside can be evenly heated and thoroughly got pyrolyzed. Besides, with horizontal rotating structure, the pyrolysis efficiency can be greatly improved. For a 10ton capacity horizontal design pyrolysis plant reactor, it will take about 8 hours to 10 hours to finish the pyrolysis process.

DOING waste tyre pyrolysis plant

The vertical type pyrolysis reactor is fixed inside the brick-made insulation, so it can not rotate during the heating process. Since the heat is only from the bottom of the pyrolysis reactor, waste tires and plastics cannot be evenly heated, which leads to a longer pyrolysis time. Normally, the pyrolysis time of a 10ton waste tyre pyrolysis plant with a vertical reactor will take more than 12 hours.

Therefore, from the aspect of working efficiency, horizontal type pyrolysis reactor is more suitable for pyrolysis tires and plastics.

For horizontal type pyrolysis reactor, the pyrolysis carbon black is discharged from the side or rear part of the waste tire plastic pyrolysis plant reactor, and the discharging process is operated in a well-sealed condition, so there is no carbon black power flying out and making factories dirty.

Carbon black wind transport system

The carbon black discharging for a vertical type pyrolysis reactor does not have any environmental protection measures. The carbon black is directly taken manually from the bottom of the reactor, which will cause the black powder flying everywhere. As people's awareness of environmental protection increases, the non-environmentally friendly pyrolysis reactor is bound to be knocked out from the market.

Therefore, it's suggested to choose the horizontal type pyrolysis reactor for pyrolysis tires and plastic. Henan Doing Company can customize the horizontal batch pyrolysis plant reactor and latest technology fully continuous pyrolysis plant reactor. Welcome to contact us for the machine details and free quotations!